">
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelbrite ROZC PR 401 |
45% | 30 - 40 | 15.0 - 11.3 | ||
Edelbrite ZPPR 402 |
44% | 30 - 40 | 12.6 - 8.80 | ||
Edelbrite ROZC PR 403 (IS:2074) |
42% | 30 - 40 | 14.0 - 10.5 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelbrite SYFN 436 (Edelbrite Synthetic Enamel Finish) |
36% | 20 - 30 | 18.0 - 12.0 | ||
Autolac Synthetic Enamel |
40% | 20 - 30 | 20.0 - 13.3 | ||
PCCOAT Synthetic Enamel |
33% | 20 - 30 | 16.5 - 11.0 |
Products Name | Certification | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
---|---|---|---|---|---|
PCBIT III HB Bitumenous Solution as per BS 3416/91, Type II, for external use |
50% | 65 - 85 | 5.0 - 6.0 | ||
Bitumenous Matt Black (HB Bitumenous Coating) |
50% | 80 - 120 | 6.8 - 4.2 | ||
Inertol 4253 (High Protective & Corrsion resistant paint for Steel reiforcement in Siporex Concrete) |
32% | 65 | 5 | ||
Black Japan 341 (Reinforced Bitumenous Finish) |
46% | 25 | 18.4 | ||
Bitumenous 158 Black (Bitumen Finish conforming to IS:158) |
48% | 25 - 35 | 19.2 - 13.7 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edeletch PR 106 (Polyvinyl butyral based Etch Primer / Pretreatment Primer) |
1:1 | 8% | 6 - 8 | 13.30 - 10.0 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelpoxy ZPPR 101 (HB Epoxy Zinc Phosphate Primer) |
4:1 | 45% | 50 - 75 | 9.0 - 6.0 | |
Edelpoxy ZPPR 103 (Polyamide cured Epoxy Zinc) |
3:1 | 42% | 30 - 40 | 14.0 - 10.5 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelpoxy CTE PR 168 (HB Coaltar Epoxy Coating) |
3:1 | 68% | 75 - 130 | 9.1 - 5.2 | |
Edelpoxy CTE FN 169 (HB Coaltar Epoxy Coating) |
3:1 | 68% | 75 - 150 | 9.1 - 4.5 | |
Edelpoxy CTE HB FN D170 (Polyamine Cured) |
1:1 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelpoxy HB MIO 116 (Epoxy Micaceous Iron Oxide) |
4:1 | 55% | 100 - 150 | 5.5 - 3.7 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelpoxy STFN 161 (HB Surface Tolerant Epoxy Mastic Coating) |
2.5:1 | 82% | 100 - 125 | 8.2 - 6.6 | |
Edelpoxy STFN WET 164 (HB Surface Tolerant Epoxy Mastic Coating) |
2.5:1 | 85% | 100 - 150 | 8.5 - 5.7 |
Products Name | Certification | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
---|---|---|---|---|---|
Edelpoxy FN 132 (Amine Cured Epoxy Coating) Pack: 20 Ltrs |
3:1 | 45% | 60 - 80 | 7.5 - 5.6 | |
Edelpoxy FN TM 142 (Epoxy Finishing) |
3:1 | 40% | 40 - 60 | 10.0 - 6.7 | |
Edelpoxy FN SL 151 (Solventless HB Epoxy Coating) |
2:1 | 100% | 400 - 500 | 2.5 - 2.0 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edelthane ZPPR 301 (Polyurethane Zinc Phosphate Primer) |
4:1 | 38% | 30 - 50 | 12.7 - 7.6 | |
Edelthane PR 302 (Polyurethane Primer) |
4:1 | 37% | 30 | 12.3 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Edethane FN 311 (Aromatic Polyurethane Finish) |
4:1 | 42% | 30 - 50 | 14.0 - 8.4 | |
Edethane FN ALI 312 (Aliphatic Polyurethane Finish) |
4:1 | 45% | 30 - 50 | 15.0 - 9.0 |
Products Name | Mixing Ratio by Volume |
Volume Solid |
D.F.T. per coat |
T.S.R. in m2/ltr/coat |
|
---|---|---|---|---|---|
Thinner GP 951 |
|||||
Thinner Bitu 952 |
|||||
Thinner Epoxy 953 |
|||||
Thinner PU 954 |